Charger

Charger MUD-H1(24V3.0A) is Intelligent 3-Phase Charger for power battery

Charger

Output Charging Current (limited current),
Rating charging current is DC 3.0A   ，in range DC 2.8A----3.1A.
LED Display,
1st step , LED → green (indicates power on)
2nd step,LED → red (indicates bulk charge)
3rd step, LED → green (means battery is ready to use and charge turns to float charge stage)
Output Charging Characteristic
Note, this chart is for 12V14AH battery, 2pc use, for other 12V battery, the charging time should be adjusted accordingly.
Short Circuit Protection,This charger wouldn’t be damaged in any time of short circuit.
Stability of Circuit,within the input voltage range, the charger will keep a stable performance whilst under any load;
Caution,the charger would be damaged if bettery misinput charger’s plus and minus.
Mechanism Characteristic,
Materials used in construction
Case,PC+ABS black, with brochure and label
Input Plug,UL standard plug, 0.75*2 AC cable, length 1.2m,Output cable: AWG18# . PVC,1.2m black
Dimensions,L153mm W 72mm H 46mm
Dropping Test
Charger dropped from 1.0m height to a 10mm pine board, repeat it for 4times with charger each side.
Result, no crack / break, no parts become flexible or not fastened, all related data remains correct. With the height of 1.0m, charger fall off to 10mm pine board, 4 times/ each face.
Vibration Test
The charger was placed upon a Vibration desk，
Frequency, 5-55Hz
Range,±1.5mm
Acceleration: 20m/s Direction,
X/Y/Z 3 directions Test Time,
1h respectively
Result,no any damage/degeneration, all related data remains correct.
High Voltage characteristics,
A high voltage of 3,000VAC between input and output terminal，current leak is lower than
10mA，continue 60 seconds, 1 second for production line.
Stock Environment,Temperature , -25°C----+70°C,Humidity,5% - 90%
Work Environment,Temperature,- 0°C----+40°C, Humidity,5% - 90%

Charger